Reclads and weathertightness in Auckland
Honest assessment, a clear price and a building envelope done properly.

Find out why it’s leaking
If your house is leaking, the first job is finding out why. Then you need someone to tell you honestly what it needs: a full reclad, an overclad, or a targeted repair. Those three can be a long way apart in cost.
We’ll walk the house with you, read the surveyor’s report and give you a straight view. Then we price it properly.
How a Luxor reclad runs
- Assess. We inspect the house, review the weathertightness report and test its recommendations against what we see on site. Sometimes the cladding has failed. Sometimes it’s only the edges: flashings, seals, spouting and fascias.
- Decide. A reclad strips the cladding back to the frame. An overclad builds a new cavity over a sound substrate. A targeted repair fixes what has failed and leaves the rest. We’ll tell you which one your house needs, and why.
- Price. We measure every elevation and price the job in the order it will be built. Assumptions, exclusions and risks are written down. Allowances for what can’t be seen yet, like the framing behind the cladding, sit in the open as separate items, not buried in a lump sum.
- Consent and joinery. Your designer prepares the consent drawings. Windows are ordered early so they arrive while the scaffold is still up.
- Build. Scaffold, strip, inspect the framing, repair it, then wrap, cavity, flashings, cladding and paint.
- Sign off. Council inspections, producer statements, our record of work, and a handover file you can keep.
Licensed, certified and guaranteed
Cladding a house is restricted building work. It has to be carried out or supervised by a Licensed Building Practitioner. Eddie is an LBP (Carpentry and Site 2) and supervises the work himself.
We’re members of NZ Certified Builders and bound by its Code of Ethics. As NZCB members we can offer the Halo 10-Year Residential Guarantee on eligible work.
Open book, start to finish
You’ll get a contractor’s report every week or fortnight, with progress photos and confirmed dates. On larger jobs we report the money monthly too. If the wall shows us something new, you’ll see it, and see it priced, before any work is done on it.
The details we don’t compromise on
Most leaks start at an edge. So that’s where our standards sit above the code minimum.
- Cladding base. Boards finish at least 100 mm below floor level. The code minimum overlap is 50 mm.
- Corners. Double vertical cavity battens each side of every corner, and 100 × 100 corner flashings where the code minimum is 50 × 50.
- Windows and doors. Battens down both jambs of every opening. Head and sill flashings are measured and folded for each opening and run 100 mm past it on each side. A 150 mm tape seals the whole reveal, and a 75 mm head tape runs 200 mm past the opening each side.
- One system. Building wrap and its tapes come from the same manufacturer’s system, so they’re compatible and the warranty holds.
- Ground and paving. We keep the code clearance from the bottom of the cladding to the ground. Paving at doors sits at least 150 mm below floor level.
None of it shows when the job’s finished. All of it decides whether the house stays dry.
What does a reclad cost?
It depends on the house, the cladding and what’s behind it.
We’ve answered the common questions in What drives the cost of a reclad in Auckland.
